说明
This application note explains the process for changing the MM200 analog output settings from a Windows 7 PC. The serial communications program Tera Term must be installed prior to following these instructions, and a serial to USB converter must be purchased. If you don’t have Tera Term installed, click here to download.
说明
1.将串口转USB转换器插入你的电脑。
2.打开 "开始 "菜单。
![Application Note 3007 | Figure 1](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure1-239x300.png)
3.打开 "控制面板"。
![Application Note 3007 | Figure 2](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure2-239x300.png)
4. Open Hardware and Sound.
![Application Note 3007 | Figure 3](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure3-300x218.png)
5.打开 "设备管理器"。
![Application Note 3007 | Figure 4](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure4-300x217.png)
6.展开端口(COM和LPT)下拉菜单。
![Application Note 3007 | Figure 5](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure5-210x300.png)
7.确定你的USB转串口转换器的COM端口分配,在这个例子中,转换器被分配到COM3。
8.打开TeraTerm。
9.打开设置菜单,选择串行端口...选项。
![Application Note 3007 | Figure 6](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure6-300x213.png)
10.将端口设置改为你的USB转串口转换器的COM端口,本例中是COM3。
11.确保其余的设置如下,然后选择确定。
- 波特率9600
- 数据。8位
- 奇偶性:无
- 停止:1位
- 流程控制:无
- 传输延迟。0毫秒/字,0毫秒/行
![Application Note 3007 | Figure 7](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure7-300x245.png)
12. Open the Setup menu and select the Terminal setup… option
![Application Note 3007 | Figure 8](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure8-300x213.png)
13.确保设置如下,然后选择确定。
- 接收:CR+LF
- 发射:CR+LF
- 本地回音检查
![Application Note 3007 | Figure 9](http://ec2-3-210-119-114.compute-1.amazonaws.com/wp-content/uploads/2023/04/an3007-figure9-300x194.png)
14. Send the following commands to change the analog output setting, this example changes the 7B output to Linear (<CR> is equivalent to pressing the Enter key). A full list of commands and analog output options can be found in the table below.
- R7BN<CR>
- SE<CR>
传感器 | 指挥部 | 名称 | 范围(托尔) | 五/司 | 说明 |
1E/F | R1EN | 直线型 | 1/100至1000/10,000 | 0至10V | 10 V = 1000/10,000 Torr |
1E/F | R1EM | 线性/十年 | 1/100至1000/10,000 | 2.00伏特/十年 | 10 V = 1000/10,000 Torr |
1E/F | R1EL | 对数 | 1/100至1000/10,000 | 3.33伏特/十年 | 10 V = 1000/10,000 Torr |
2A | R2AN | 直线型 | 10-3比1 | 0至10V | 10 V = 1 Torr |
2A | R2AL | 对数 | 10-3比1 | 3.33伏特/十年 | 10 V = 1 Torr |
2A | R2AT | 传统的 | 10-3至20 | 0至10V | 10V=10-3托尔 |
2A | R2AR | 线性修订版 | 10-3比1 | 0至10V | 10V=10-3托尔 |
3F | R3FM | 线性/十年 | 10-11至10-2 | 1.00伏特/十年 | 10 V = 10-2Torr |
3F | R3FL | 对数 | 10-11至10-2 | 1.00伏特/十年 | 10 V = 10-2 Torr |
3F | R3Fx | 直线型 | 10-2至10-x | 0至10V | 10 V = 10-8<-x<-2 Torr |
4A | R4AN | 线性/十年 | 10-3至1 000 | 1.00伏特/十年 | 10 V = 1000 Torr |
4A | R4AU | 直线型 | 10-3比1 | 0至10V | 10 V = 1 Torr |
4A | R4AT | 直线型 | 10-3至10 | 0至10V | 10 V = 10 Torr |
4A | R4AL | 对数 | 10-3至1 000 | 1.67伏特/十年 | 10 V = 1000 Torr |
5A/B/C/D/E/F | R5AN | 直线型 | 全比例 | 0至10V | 10 V = 满刻度 |
5A/B/C/D/E/F | R5AL | 对数 | 3个十年 | 3.33伏特/十年 | 10 V = 满刻度 |
7B | R7BM | 线性/十年 | 10-7至10-3 | 2.00伏特/十年 | 10V=10-3托尔 |
7B | R7BL | 对数 | 10-6至10-3 | 3.33伏特/十年 | 10V=10-3托尔 |
7B | R7BE | 扩展对数 | 10-7至10-3 | 2.50伏特/十年 | 10V=10-3托尔 |
7B | R7BN | 直线型 | 10-6至10-3 | 0至10V | 10V=10-3托尔 |
7B | R7BT | 传统的 | 10-7至10-3 | 0至10V | 10V=10-3托尔 |
7E | R7EM | 线性/十年 | 10-8至10-2 | 1.00伏特/十年 | 10 V = 10-2Torr (4-10 V) |
7E | R7EL | 对数 | 10-8至10-2 | 1.67伏特/十年 | 10 V = 10-2Torr |
7E | R7Fx | 直线型 | 10-2至10-x | 0至10V | 10 V = 10-7<-x<-2 Torr |
7F/FC/FCS | R7FM | 线性/十年 | 10-11至10-2 | 1.00伏特/十年 | 9V=10-2托尔 |
7F/FC/FCS | R7FL | 对数 | 10-11至10-2 | 1.00伏特/十年 | 9V=10-2托尔 |
7F/FC/FCS | R7Fx | 直线型 | 10-2至10-x | 0至10V | 10 V = 10-8<-x<-2 Torr |
15. This process can be repeated as many times as necessary for different sensors until all of the desired analog outputs are changed.