Televac® MX200 EthernetIP Vacuum Controller

  • Rack mountable with a highly configurable design
  • USB included in every unit for simple connection with a PC
  • High contrast OLED display with 180° viewing angle
  • Selectable units of measurement (Torr, mbar, Pascal)
  • Bootloader for field upgradeable firmware
  • Gas conversion functions included for nitrogen/air, argon, hydrogen, helium, neon, krypton, and carbon dioxide
  • Analog outputs (0 to 10 V DC) for every connected passive vacuum gauge
  • User-configurable analog output ranges
  • Excellent customer support
  • ISO 17025 accredited and NIST-traceable calibrations optional
  • DHCP enable or disable with programmable IP address
  • Status LEDs for network/module status/port data activity
  • 10/100 Mbit, half or full duplex port operation
  • Secure web access for network and unit data and settings

The Televac® MX200 EthernetIP vacuum controller (also called a vacuum control unit or vacuum pressure controller) can be connected to up to 10 Televac® passive vacuum gauges including cold cathode gauges, convection gauges, diaphragm gauges, and thermocouple vacuum gauges. It also includes 0 to 10 V DC analog outputs for each vacuum gauge connected to the vacuum controller, EthernetIP/USB digital communications for simple integration with a PC or PLC, and up to 8 optional set point relays to act as a vacuum pressure controller for process control in your vacuum system.

The MX200 vacuum controller’s user interface includes six touch controls and a high contrast, 180° viewing angle OLED display, which shows measurements from up to 8 connected vacuum gauges simultaneously along with the selected units of measurement and the status of set point relays. This vacuum control unit supports multiple gas types including nitrogen/air, argon, hydrogen, helium, neon, krypton, and carbon dioxide. The MX200 vacuum controller is a modular unit, allowing you to choose a vacuum sensing solution specific to your needs.

Looking for a smaller, scaled down version of this vacuum controller? Check out the MC300. Need a vacuum controller with an analog display? Check out the Compact 2A.

Product Description
Televac® MX200 EthernetIP Vacuum Controller
Televac® MX200 EthernetIP Vacuum Controller
PN: 2-7900-037
Instrument Part Number
MX200 Base Unit USB/EthernetIP 2-7900-037
MX200 Base Unit USB/RS-232/RS-485 2-7900-034
Module Part Number Slot (max)
Set Point Quad Relay 2-6200-411 1 (2)
1E Dual Piezo Diaphragm 2-6200-220 1 (5)
1F Dual Piezo Diaphragm 2-6200-244 1 (5)
2A Dual Thermocouple 2-6200-486 1 (5)
4A Dual Convection 2-6200-415 1 (5)
7B Penning Magnetron Cold Cathode 2-6200-227 2 (3)
7EF DI Magnetron Cold Cathode 2-6200-285 1 (5)
Capacitance Diaphragm 2-6200-252 1 (5)
Operating Range 1*10-11 Torr to 10,000 Torr
Communications USB/EthernetIP
Analog Output 0 to 10 V DC (1 per sensor)
Analog Output Resolution 16 Bits
Programmable Set Points 4 per module (8 max)
Set Point Type Relay
Supply Voltage 115/230 V AC (2/1 A), 50-60Hz
Maximum Power 230 W
Calibration Medium Dry air or nitrogen
Operating Temperature 0 °C to 50 °C
Storage Temperature -20 °C to 70 °C
Display Readable Distance 5 m (16 ft)
Maximum Sensors Controlled 10
Maximum Sensors Displayed 8
Response Time ≤10 ms
P1 EthernetIP RJ45 port 1
P2 EthernetIP RJ45 port 2
NS USB communications
MS Module status LED
USB USB communications
Setup Lock Front panel lock switch
BTLD Bootload button
MX200 EthernetIP Vacuum Controller Electrical Connections (Pin Diagram)
Connectors (2) RJ45
Ports 10/100 Mbit, half/full duplex
DHCP Enable or disable
   
Class 1 Connections  
Connection Type Point-to-point, multicast
Target to Originator Instance ID 100
Data Size 40
Originator to Target Instance ID 150
Data Size 4
Configuration Instance 3
Supported Connections 4
Requested Packet Interval 1 to 3200 ms
Trigger Types Cyclic, change of state
Priorities Low, high, schedule, urgent
   
Class 3 Connections  
Service 0xE (get), 0x10 (set)
Class 0xA2
Instance See ADI table
Data Value Attribute 5
Supported Connections 6
Requested Packet Interval 100 to 10000 ms
Connection Type Application
Priority Low

The MX200 has up to eight relay set points. The relays are located on two optional relay modules with four set points each. Individual relay statuses are displayed on the front panel. The heavy-duty relays have an SPDT (1 Form C) contact form and are rated for 24 V DC. They have a maximum current rating of 8 A at 250 V AC or 5 A at 30 V DC.

Housing Aluminum
Electrical Connections Power cord (IEC 60320 C-13)
Weight (Base Unit) 2.2 kg (5 lbs)

MX200 Vacuum Controller Electrical Connections (Pin Diagram)

MX200 Vacuum Controller Electrical Connections (Pin Diagram)

MX200 Vacuum Controller Electrical Connections (Pin Diagram)

Certified to UL 61010-1
CE certified to EN61326-1:2006
Certified to CAN/CSA C22.2 No. 61010-1-12
EAC certified
ISO 17025 accredited calibration optional
NIST-traceable calibration optional

Download STEP File

Part Number Description STEP File
2-7900-03X MX200 Vacuum Controller Download

CompactLogix™ is a registered trademark of Rockwell Automation, Inc. All other trademarks are the property of their respective owners.