0729-1758-99 ±45° Programmable Single-Axis Tilt Switch

0729-1758-99 Open Collector
Download Datasheet

Part Number: 0729-1758-99

Features and Benefits:

  • ±45° programmable trip points
  • Single/one axis measurement tilt switch
  • 2 simple to use open collector outputs
  • Response time of ≤100 ms
  • Wide voltage supply range of 4.5 V DC to 28 V DC
  • Works with industry-standard 12 and 24 V DC vehicle batteries
  • Low current device drawing 3mA @ 4.5V and 28V; low power consumption
  • Flying leads cable with custom connectors available for simple integration
  • Superior performance in extreme temperatures and environments
  • Excellent customer support

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. This tilt switch has 2 open collector outputs which can be set to trip at specific angles on one axis, up to ±45° tilt. This tilt switch comes in a plastic housing, environmentally sealed and rated up to IP64 (epoxy potting is available upon request for IP66 protection), with a flying leads cable that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field via a hardware switch on the unit.

The nature of the open collector output makes this unit ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers. Not sure how an open collector output works? Check out the product manual under Documentation.

To learn more about the principles of tilt sensing and how to integrate tilt switch sensor modules into your application, see our Technical Information page.

Ordering Information

Product Description
Price
Quantity
±45° Programmable Single-Axis Tilt Switch
±45° Programmable Single-Axis Tilt Switch
PN: 0729-1758-99
$100.72

Specifications

Output 2 open collectors
Supply Voltage 4.5 V DC to 28 V DC
Supply Current 3 mA @ 4.5 V DC to 28 V DC
Operating Range ±45º
Axes of Measurement 1
Repeatability ≤0.1°
Null Offset ≤5°
Cross-Axis (Roll) Sensitivity ≤0.025° per degree
Long Term Stability/Drift ≤0.1°
Null Temperature Coefficient ≤0.006° per °C
Scale Temperature Coefficient 0.1% per °C
Materials Contains magnetic metals
Operating Temperature -40 °C to 70 °C
Storage Temperature -40 °C to 70 °C
Temperature Sensor Range -40 °C to 125 °C
Time Constant (63.2% of final output) ≤100 ms
Output Delay 0.5 s
Output Hysteresis 0.35°
Housing ABS Plastic
Electrical Connections 18" cable with 24-gauge wire
Weight 40 g
Length 50.8 mm (2.000”)
Width 38.1 mm (1.500”)
Height 19.1 mm (0.750”)
Flange Length 76.2 mm (3.000”)
Hole Center 63.5 mm (2.500”)
Hole Diameter 4.8 mm (0.190”)
0729-1757-99 Dimensional Drawing
Red Supply (4.5 V DC to 28 V DC)
Black Supply (-)
Green Ground for supply and open collectors
Blue Left trip point open collector
Gray Right trip point open collector

The open collector is open (disconnected from ground) when non-tripped and closed (connected to ground) when tripped. It is rated to a maximum of 200 mA when closed. For opposite open collector output functionality (closed when non-tripped and open when tripped), see the 0729-1757-99.

RoHS Compliant
IP50 Environmental Protection (standard, not potted)
IP66 Environmental Protection (potted by request)

0729-1758-99 Quantity Discounts

Quantity Price
1 $100.72
10 $85.62
100 $73.07
500 $66.82
1000+ $62.03